Difference between revisions of "Pumice 1/8""
From Archimedys English
(Created page with "== Description == [[File:|thumb|caption]] *Bulk material codification principle here : [//archimedys.com/wiki-En/index.php/Bulk_material_characteristics Bulk material codific...") |
(No difference)
|
Revision as of 16:41, 27 July 2015
Contents
Description
[[File:|thumb|caption]]
- Bulk material codification principle here : Bulk material codification
- Material codification explanation here : Material code table
- Lump size limitation Lump size table
- Archimedys modular screw calculation sheets and catalogs here : Archimedys
Bulk Material Characterization - Key Properties for Material Handling Equipment Design
| Characteristics | Contents |
|---|---|
| Appearance | |
| Flowability | Sluggish |
| Abrasiveness | Moderately Abrasive |
| Material code | 721 B6 46 |
| Specific weight as convey | 673-769 kg/m3 |
| Particle size | Fine No. 6 Sieve (3,35 mm ) and Under (B6) |
| Material factor Fm | 1,6 |
| Conveyor recommended filling level | 30 % |
| Angle of maximal inclination in° | 0 ° |
| Vertical lift | Olds elevator Recommended http://www.oldselevator.com/ |
| Specific hazard | |
| Recommendation | |
| Risks |
Imperial measurement
| Characteristics | Contents |
|---|---|
| Specific weight as convey | 42-48 lbs/ft3 |
| Material code | 45 B6 46 |
| Particle size | Fine No. 6 Sieve (0.132" ) and Under (B6) |
Miscellaneous
Screw conveyor horse power requirement, torsional rating, conveyor size, … www.archimedys.com
