Difference between revisions of "Salt Cake Dry Pulverized"
From Archimedys English
(Created page with "== Description == Salt cake is an impure form of sodium sulphate obtained as a by-product in several industrial processes. I is used in the manufacture of detergents, glass, a...") |
|||
| Line 1: | Line 1: | ||
== Description == | == Description == | ||
Salt cake is an impure form of sodium sulphate obtained as a by-product in several industrial processes. I is used in the manufacture of detergents, glass, and ceramic glazes. | Salt cake is an impure form of sodium sulphate obtained as a by-product in several industrial processes. I is used in the manufacture of detergents, glass, and ceramic glazes. | ||
| − | + | ||
*Bulk material codification principle here : [//archimedys.com/wiki-En/index.php/Bulk_material_characteristics Bulk material codification] | *Bulk material codification principle here : [//archimedys.com/wiki-En/index.php/Bulk_material_characteristics Bulk material codification] | ||
*Material codification explanation here : [//archimedys.com/wiki-En/index.php/Material_code_table Material code table] | *Material codification explanation here : [//archimedys.com/wiki-En/index.php/Material_code_table Material code table] | ||
Latest revision as of 14:19, 28 July 2015
Contents
Description
Salt cake is an impure form of sodium sulphate obtained as a by-product in several industrial processes. I is used in the manufacture of detergents, glass, and ceramic glazes.
- Bulk material codification principle here : Bulk material codification
- Material codification explanation here : Material code table
- Lump size limitation Lump size table
- Archimedys modular screw calculation sheets and catalogs here : Archimedys
Bulk Material Characterization - Key Properties for Material Handling Equipment Design
| Characteristics | Contents |
|---|---|
| Appearance | Fine powder. |
| Flowability | Average Flowability |
| Abrasiveness | Moderately Abrasive |
| Material code | 1201 B6 36TU |
| Specific weight as convey | 1041-1362 kg/m3 |
| Particle size | Fine No. 6 Sieve (3,35 mm ) and Under (B6) |
| Material factor Fm | 1,7 |
| Conveyor recommended filling level | 30 % |
| Angle of maximal inclination in° | 0 ° |
| Vertical lift | Olds elevator Recommended http://www.oldselevator.com/ |
| Specific hazard | (T) Mildly Corrosive
(U) Hygroscopic |
| Recommendation | |
| Risks |
Imperial measurement
| Characteristics | Contents |
|---|---|
| Specific weight as convey | 65-85 lbs/ft3 |
| Material code | 75 B6 36TU |
| Particle size | Fine No. 6 Sieve (0.132" ) and Under (B6) |
Miscellaneous
Screw conveyor horse power requirement, torsional rating, conveyor size, … www.archimedys.com
