View source for Slag Blast Furnace Crushed

== Description ==
Slag is the glass-like by-product left over after a desired metal has been separated from its raw ore.
	[[File:Slag Crushed.jpg|thumb|caption]]
*Bulk material codification principle here : [//archimedys.com/wiki-En/index.php/Bulk_material_characteristics Bulk material codification]
*Material codification explanation here : [//archimedys.com/wiki-En/index.php/Material_code_table Material code table]
*Lump size limitation [//archimedys.com/wiki-En/index.php/Maximum_lump_size_limitation_in_a_screw_conveyor Lump size table]
*Archimedys modular screw calculation sheets and catalogs here : [//www.archimedys.com Archimedys]
== Bulk Material Characterization - Key Properties for Material Handling Equipment Design  ==
{| class="wikitable"
|-
! Characteristics !! Contents
|-
| Appearance ||Grey stone blocks.
|-
| Flowability ||	Average Flowability
|-
|  Abrasiveness ||	Extremely Abrasive
|-
| Material code ||	2483 D3 37Y
|-
| Specific weight as convey ||	2082-2883 kg/m3
|-
| Particle size ||	Granular 76 mm and Under  (D3)
|-
| Material factor Fm ||	2,4
|-
| Conveyor recommended filling level  ||	15 %
|-
| Angle of maximal inclination in° ||	0 °
|-
| Vertical lift||	Olds elevator Recommended http://www.oldselevator.com/
|-
| Specific hazard ||	(Y) Very Light and Fluffy—May Be Windswept
|-
| Recommendation ||
|-
| Risks ||
|}
----
==Imperial measurement==
{| class="wikitable"
|-
! Characteristics !! Contents
|-
| Specific weight as convey ||	130-180  lbs/ft3
|-
| Material code ||	155 D3 37Y
|-
| Particle size ||	Granular (3")  and Under  (D3)
|}
----
==Miscellaneous==
Screw conveyor horse power requirement, torsional rating,
conveyor size, … [//www.archimedys.com www.archimedys.com]