View source for Sal Ammoniac

== Description ==
Sal Ammoniac, an inorganic compound, is a white crystalline salt, highly soluble in water. Solutions of ammonium chloride are mildly acidic.
	[[File:Ammonium chloride.jpg|thumb|caption]]
*Bulk material codification principle here : [//archimedys.com/wiki-En/index.php/Bulk_material_characteristics Bulk material codification]
*Material codification explanation here : [//archimedys.com/wiki-En/index.php/Material_code_table Material code table]
*Lump size limitation [//archimedys.com/wiki-En/index.php/Maximum_lump_size_limitation_in_a_screw_conveyor Lump size table]
*Archimedys modular screw calculation sheets and catalogs here : [//www.archimedys.com Archimedys]
== Bulk Material Characterization - Key Properties for Material Handling Equipment Design  ==
{| class="wikitable"
|-
! Characteristics !! Contents
|-
| Appearance ||Very fine withe crystalline powder.
|-
| Flowability ||	Sluggish
|-
|  Abrasiveness ||	Mildly Abrasive
|-
| Material code ||	785 A100 45FRS
|-
| Specific weight as convey ||	721-833 kg/m3
|-
| Particle size ||	Very fine No. 100 Sieve  ( 0,15 mm) and Under   (A100)
|-
| Material factor Fm ||	0,7
|-
| Conveyor recommended filling level  ||	30 %
|-
| Angle of maximal inclination in° ||	0 °
|-
| Vertical lift||	Olds elevator Recommended http://www.oldselevator.com/
|-
| Specific hazard ||	 (F) Builds Up and Hardens
	(R ) Gives Off Harmful  or Toxic Gas or Fumes
	(S) Highly Corrosive
|-
| Recommendation ||
|-
| Risks ||
|}
----
==Imperial measurement==
{| class="wikitable"
|-
! Characteristics !! Contents
|-
| Specific weight as convey ||	45-52 lbs/ft3
|-
| Material code ||	49 A100 	45FRS
|-
| Particle size ||	Very fine No. 100 Sieve  ( 0,0059") and Under   (A100)
|}
----
==Miscellaneous==
Screw conveyor horse power requirement, torsional rating,
conveyor size, … [//www.archimedys.com www.archimedys.com]